5ft. x 8ft, 5.30-12in. Tires – – Ironton Heavy-Duty Trailer Kit

Ironton - X 8ft. The ironton 5ft. Heavy-duty trailer kit has a large, customizable 96in. Customizable steel deck area to handle large loads. Rolls smoothly on two 5. 30-12in. Assembly required: yes, Brakes: No, Deck Size L x W ft. 5 x 8, gross vehicle Weight Rated lbs. 1, fenders: yes, frame material: steel, Jack Type: No, 980, Wheel Size in.

5. 3 - 12, coupler Size in. 2, side rails included: No, Load Capacity lbs. 1, bed tilt: no, 715, lights: yes, rear gate: No, Overall Dimensions L x W x H in.136 x 76 x 16 1/4, deck material: steel, Ramps Included: No 136in. L x 76in. W overall size with 1715-lb. Coupler assembly and wiring harness connect to your vehicle to ensure trailer safety on the road, even in dark or rainy conditions.

5ft. x 8ft, 5.30-12in. Tires - - Ironton Heavy-Duty Trailer Kit - Includes safety chains and light kit so you can hit the road immediately. Max. Gvwr. 1980-lb. Meets or exceeds all road-ready specifications and DOT requirements.

More information about Ironton

REESE Towpower 74410 Trailer Jack, Heavy-Duty Swivel Mount, 6-Inch Wheel

Reese Towpower 74410 - Capacity: the reese towpower trailer jack fits tongues 3" to 5" and helps easily raise and lower any trailer with a capacity of up to 1, 000 lbs. Swivel access: heavy-duty swivel mechanism with a pull-pin release makes it easy to access the jack when you need it, and store it away when you don't. Operates in seconds: side-winding handle with a ergonomic knob knob operates with a 1:1 gear ratio for fast, smooth usage.

Glides easily: sturdy 6" wheel provides low-friction mobility and helps you easily move your trailer into position. For added mobility, this jack includes 6” wheel that glides easily and lowers the friction to help you move a trailer into position with minimal effort. The powerful reese towpower trailer jack fits tongues 3” to 5” and helps effectively raise and lower trailers with a capacity up to 1, 000 lbs.

REESE Towpower 74410 Trailer Jack, Heavy-Duty Swivel Mount, 6-Inch Wheel - Operating with a 1:1 gear ratio, the side-winding handle with a wire-grip knob allows for fast and smooth usage while a heavy-duty swivel mechanism and pull-pin release make it easy to access the device when you need it, and store it away when you don’t. Dimensions: 24" x 7" x 7". 1, 000 lb.

More information about Reese Towpower 74410


Similar products



Pair of Telescoping Trailer Stabilizer Jacks1000lb capacity each by Pacific Rim

Pacific Rim 5864295297 - Capacity: the reese towpower trailer jack fits tongues 3" to 5" and helps easily raise and lower any trailer with a capacity of up to 1, 000 lbs. Swivel access: heavy-duty swivel mechanism with a pull-pin release makes it easy to access the jack when you need it, and store it away when you don't. Operates in seconds: side-winding handle with a ergonomic knob knob operates with a 1:1 gear ratio for fast, smooth usage.

Glides easily: sturdy 6" wheel provides low-friction mobility and helps you easily move your trailer into position. 650 lbs. Dimensions: 24" x 7" x 7". Pair of flip down stabilizer jacks with handle, ideal for all types of RV, utility and cargo trailers. Lift support capacity per jack. Adjustable from 11-1/2" to 17-3/4" vertical height.

Pair of Telescoping Trailer Stabilizer Jacks1000lb capacity each by Pacific Rim - Handle included with pair of stabilizer jacks. Black painted finish. 1, 000 lb. 1000 lbs. Support capacity per jack.

More information about Pacific Rim 5864295297


Similar products



Dicor BT-1834-1 1/8" x 3/4" x 30' Butyl Seal Tape

Dicor BT-1834-1 - 1000 lbs. Lift support capacity per jack. Adjustable from 11-1/2" to 17-3/4" vertical height. Handle included with pair of stabilizer jacks. Black painted finish. Priced each. 1/8 inch x 3/4 inch x 30 Feet. Capacity: the reese towpower trailer jack fits tongues 3" to 5" and helps easily raise and lower any trailer with a capacity of up to 1, 000 lbs.

Swivel access: heavy-duty swivel mechanism with a pull-pin release makes it easy to access the jack when you need it, and store it away when you don't. Operates in seconds: side-winding handle with a ergonomic knob knob operates with a 1:1 gear ratio for fast, smooth usage. Glides easily: sturdy 6" wheel provides low-friction mobility and helps you easily move your trailer into position.

Dicor BT-1834-1 1/8" x 3/4" x 30' Butyl Seal Tape - 650 lbs. Installs quickly, without gaps. Butyl tape only, 1/8 inch x 3/4 Inch x 30 Feet, Each. Because the sealant is on a continuous roll, installer can work fast and be virtually assured that there are no skips or runs in the seal. Dimensions: 24" x 7" x 7". Dicor butyl tape - Ideal for sealing uniquely shaped joints.

Because the sealant is on a continuous roll, installer can work fast and be virtually assured that there are no skips or runs in the seal.

More information about Dicor BT-1834-1


Similar products



Rv Teardrop Tear Drop Trailer 5' Aluminum Hurricane Hinge for Galley Hatch Door

Vintage Technoloies HT06 - Used without any problems on thousands of teardrop camping trailers. Installs quickly, without gaps. Because the sealant is on a continuous roll, installer can work fast and be virtually assured that there are no skips or runs in the seal. Original heavy duty design. One 60" heavy duty Aluminum Hurricane Hinge.

2-piece extruded Aluminum - mill finish. 1, 000 lb. Support capacity per jack. Dicor butyl tape - Ideal for sealing uniquely shaped joints. Lift support capacity per jack. Adjustable from 11-1/2" to 17-3/4" vertical height. Historically, proven to be the best. Handle included with pair of stabilizer jacks. Black painted finish.

Rv Teardrop Tear Drop Trailer 5' Aluminum Hurricane Hinge for Galley Hatch Door - Frank bear hurricane hinge Don't be fooled by imitations, this is the original heavy duty hurricane hinge. 1000 lbs. 1/8 inch x 3/4 inch x 30 Feet. Hurricane" leakproof galley lid hinge 2-piece extruded aluminum - mill finish! Lower Profile Crown Tighter "Nesting Pocket" Within the Crown less slop/play NO Lid-to-Roof Offset! Dimensions: 24" x 7" x 7".

Cut at 60 3/4".

More information about Vintage Technoloies HT06


Similar products



Vintage Technologies WD24 RV Teardrop Passenger Side Black Foam Core Trailer Door 26" x 36"

Vintage Technologies - Interior cabin side trim Ring fits up to 1-1/2" Wall Thickness. 1000 lbs. Includes Stainless Steel Mounting Hardware. 1, 000 lb. Includes free black PVC Insert Screw Cover. Apply along unusual patterns. Handle included with pair of stabilizer jacks. Black painted finish. Because the sealant is on a continuous roll, installer can work fast and be virtually assured that there are no skips or runs in the seal.

. The cut out on the door cut out measure 26-1/4" x 36-1/4" with 4-1/2" radius corners. With the black aluminum exterior and white vinyl Interior and tinted glass with radius corners they give that sleek "Vintage Classic" look to the teardrop trailers that have made them so popular in today's market. Lift support capacity per jack.

Vintage Technologies WD24 RV Teardrop Passenger Side Black Foam Core Trailer Door 26" x 36" - Adjustable from 11-1/2" to 17-3/4" vertical height. Support capacity per jack. Dicor butyl tape - Ideal for sealing uniquely shaped joints. 2-piece extruded Aluminum - mill finish. 1/8 inch x 3/4 inch x 30 Feet. Installs quickly, without gaps. This door comes with full view 16 x 31 tinted window "largest in the industry" with 1/2 vent and screen, Interior dead bolt lock, Interior trim ring, Exterior key lock, Drip cap.

More information about Vintage Technologies


Similar products



Vintage Technologies Rv Teardrop Camper Cargo Trailer 4 93" Insert Type Roof Edge Trim Molding

Vintage Technogies HT11 - This style roof edge molding is designed to use with the 1" PVC insert molding that we sell in our store. 2-piece extruded Aluminum - mill finish. 1000 lbs. Easy install Face Mount Technology. Installs quickly, without gaps. Lift support capacity per jack. Adjustable from 11-1/2" to 17-3/4" vertical height. Capacity: the reese towpower trailer jack fits tongues 3" to 5" and helps easily raise and lower any trailer with a capacity of up to 1, 000 lbs.

Swivel access: heavy-duty swivel mechanism with a pull-pin release makes it easy to access the jack when you need it, and store it away when you don't. Operates in seconds: side-winding handle with a ergonomic knob knob operates with a 1:1 gear ratio for fast, smooth usage. Glides easily: sturdy 6" wheel provides low-friction mobility and helps you easily move your trailer into position.

Vintage Technologies Rv Teardrop Camper Cargo Trailer 4 93" Insert Type Roof Edge Trim Molding - 650 lbs. Drip Cap. Type t-1 super flexible easy to bend. For a professional looking finish on your project were the roof meets the sidewall. Includes free black PVC Insert Screw Cover. 1, 000 lb.

More information about Vintage Technogies HT11


Similar products